|
제품특징 | 제품사양 | 자료실 |
- Universal carrier frequency sensor connection
Strain gauges full, half and quarter bridges, inductive bridges, LVDT
- 6 digital inputs and 4 digital outputs
Functions definable, e.g. memory delete, frequency measurement, counter, alarm, threshold, tolerance band, status
- 2 analog outputs
±10 V, any variable attributable, e.g. netto and envelope curve
- ADC-conversion and signal conditioning with 19 bit and 5000/s
Linearization, digital filter 4th pole, scaling, tare, min/max memory, run/hold, envelope curve, arithmetics, alarm, threshold, tolerance band
- RS485 fieldbus interface
Profibus-DP, Modbus-RTU, ASCII
제품특징 | 제품사양 | 자료실 |
Analog Inputs
Accuracy Repeatability Linearity deviation Carrier frequency Connectable sensors Connection technique Cable length Measurement Type |
0.05 % typical 0.1 % in controlled environment 0.5 % in industrial area 0.003 % typical (within 24 h) 0.01 % of final value 4800 Hz Strain gauges, inductive, LVDT, RVDT,
piezoresistive, half and full bridge,single strain gauges with terminal B14 with or without sense leads max. 100 m Strain gauge full, half, and quarter,
inductive bridges, LVDT, etc. Supports 3, 4, 5, and 6 lead connection
(exci wide measuring range 2.5 to 1250 mV/V |
Analog Output
Channel Number Max. load resistance Frequency range DAC resolution Output voltage Signal source Long time drift Linearity deviation |
2 > 5 kW 0 to 1,000 Hz (-3 dB) 16 bit ±10.2 V, freely scalable each output can be controlled with a measurement
or a conditioned signal (variable) 1 mV / 48 h, 2.5 mV / 8000 h 0.01 % |
Digital Inputs
Channel Number Function Input voltage Input current Lower / upper threshold Output Reaction time Inputs 1 and 2 Inputs 3 to 6 |
6, active circuit (high/low) 6 x status, Tare, reset, run/hold a.s.o. or single counter, 5 x status or up/down, quadrature, 4 x status max. 50
kHz 32 Bit or Frequency measurement, 5 x status Time base 0.01 to 10 s max. 30 VDC max. 6 mA <2.0 V (low) / >10 V (high) process or host controlled 1 ms 1 up to 10 ms, depends on number of variables |
Digital Outputs
Channel Number Output Type of output Output voltage Output current Reaction time |
4 process or host controlled Open Collector max. 30 V max. 100 mA 1 up to 10 ms, depends on number of variables |
Power Supply
Power supply Power consumption Influence of the voltage |
10 to 30 VDC overvoltage and overload protection approx. 1.5 W 0.001 %/V |
Mechanical
Case Dimensions (W x H x D) and weight Protective system Mounting |
Aluminium and ABS 70 x 90 x 83 mm (2.76 x 3.54 x 3.27 in), 250 g (0.55 lb) IP20 DIN EN-Rail |
Environmental
Operating temperature Storage temperature Relative humidity |
-20°C up to +60°C -40°C up to +85°C 5 % up to 95 % at 50°C, non condensing |
Warm Up Time
All declarations are valid after a warm up time of 45
minutes